Sheth Printograph Pvt. Ltd.

HOME |

DAYA PLATEN is designed for Die-Cutting, Embossing and Creasing Job on Paper, Card Board, Corrugated Board, Fiber Board, Vinyl, Foam, Rubber, Leather, Masonite, Cork Sheets, Polyurethane, Linoleum, etc. This is the right machine for printing presses to emboss stereoscopic designs and letters on delicate printed matters to meet the demand of both Packaging & Printing industries.

SALIENT FEATURES:

¤	Impression Adjustment through two eccentric bushes
¤	Electro Magnetic Clutch & Brake to eliminate possibility of time lag between driving & breaking
¤	Dual Timing Device to give a variable period from half to ten seconds
¤	Two Safety Devices to stop the moving block immediately and isolate the starting mechanism
¤	Standard Accessories: One Impression Plate, Two Steel Chases, Feed and delivery boards, Centralised lubrication system and tools

TECHNICAL SPECIFICATIONS:

Platen Size	Inside Chase Size	Impressions per hour	H.P. required	Weight (Approx)
55 x 70 cms 22” x 28”	47 x 62 cms 19” x 25”	2000	3 H.P.	2.8 Ton
62 x 90 cms 25” x 35”	55 x 80 cms 22” x 32”	1800	5 H.P.	3.0 Ton
72 x 100 cms 28” x 40”	62 x 90 cms 25” x 37”	1500	5 H.P.	4.5 Ton
87 x 112 cms 36” x 46”	77 x 105 cms 32” x 42”	1200	5 H.P.	5.5 Ton
92 x 129 cms 37” x 52”	85 x 120 cms 34” x 48”	1000	7.5 H.P.	6.5 Ton
100 x 138 cms 40” x 55”	92 x 125 cms 36” x 50”	1000	10 H.P.	7.5 Ton

(Larger / customized sizes also available)
(Design and specifications are not binding due to constant improvements)

Top

SALIENT FEATURES:

¤	Hot Foil Stamping attachment with maximum 3 steps
¤	Hot Plate fitted with thermostatically controlled heater
¤	Separate drive for each rewinder
¤	Impression Adjustment through two eccentric bushes
¤	Electro Magnetic Clutch & Brake to eliminate possibility of time lag between driving & breaking
¤	Dual Timing Device to give a variable period from half to ten seconds
¤	Two approved Safety Guards to stop the moving block immediately and isolate the starting mechanism
¤	Standard Accessories: One Impression Plate, Two Steel Chases, Feed and delivery boards, Centralised lubrication system and tools

TECHNICAL SPECIFICATIONS:

Platen Size	Inside Chase Size	Max. Hot Stamping Size	Heated Load	Impressions per hour	H.P. required	Weight (Approx)
55 x 70 cms 22” x 28”	47 x 62 cms 19” x 25”	40 x 50 cms 16” x 20”	1.5 KW	2000	3 H.P.	2.8 Ton
62 x 90 cms 25” x 35”	55 x 80 cms 22” x 32”	45 x 60 cms 18” x 24”	2 KW	1800	5 H.P.	3.0 Ton
72 x 100 cms 28” x 40”	62 x 90 cms 25” x 37”	50 x 75 cms 20” x 30”	2 KW	1500	5 H.P.	4.5 Ton

(Larger / customized sizes also available)
(Design and specifications are not binding due to constant improvements)

Top

SALIENT FEATURES:

¤	Helical gears made of special grade steel
¤	Two moving ‘S’ parts to control balance of big platen
¤	Direct Die Clamping system
¤	Three Safety devices to stop the moving block immediately and isolate the starting mechanism
¤	Centrally motorized oil pump with timer
¤	Impression Adjustment through two eccentric bushes
¤	Electro Magnetic Clutch & Brake to eliminate possibility of time lag between driving & breaking
¤	Dual Timing Device to give a variable period from half to ten seconds
¤	Separate moving main control panel
¤	Mirror glass finished impression plate
¤	Operator standing table
¤	Standard Accessories: One Impression Plate, Two Steel Chases, Feed and delivery boards and tools

TECHNICAL SPECIFICATIONS:

Platen Size	Inside Chase Size	Impressions per hour	H.P. required	Weight (Approx)
114 x 165 cms 45” x 65”	106 x 157 cms 42” x62”	1000	10 H.P.	10 Ton
122 x 178 cms 48” x 70”	114 x 170 cms 45” x 67”	900	10 H.P.	11 Ton
130 x 183 cms 51” x 72”	122 x 175 cms 48” x 69”	900	10 H.P.	11.5 Ton
140 x 218 cms 55” x 86”	132 x 211 cms 52” x 83”	900	15 H.P.	12 Ton

(Larger / customized sizes also available)
(Design and specifications are not binding due to constant improvements)

Top

AN ISO 9001 CERTIFIED COMPANY