| |
 |
| |
| MODEL SPRINT |
 |
|
| |
| Superior Versatility & Productivity |
| Thermal Lamination |
| Sheet to Sheet Lamination |
| Two side Thermal Lamination (Optional) |
| Inline Embossing unit (Optional) |
|
| |
| Feeder |
| Integrated feeder delivers seamless workflow and precision alignment |
| Delivers reliable feeding for high performance operation |
| Sheet length and under lapping programmable by control panel of PLC |
| Dual system feeder-head for lifting and advancing sheets increases accuracy and consistent feed |
| Easy setup increases productivity |
|
| |
| Laminator |
| Water / Oil heated chrome roller provides uniform temperature and rapid heat recovery |
| Highly polished chrome laminating roller, 270mm |
| Counter pressure roller with special rubber coating, 160mm |
| Pneumatic nip pressure maximizes film adhesion |
| Laminating nip pressure up to 6 metric tonnes |
| Manometer for supervision of pressure |
Film unwinding shaft with pneumatic expansion elements for easy exchange of film reel along
with
a slitter and perforating mechanism |
| Unwind diameter max. 400mm |
| Adjustable film slitting capability for optimum film stock usage |
|
| |
| Separator |
| Automatic Sheeter that runs in-line with laminator |
| Adjustable anti-curling bar with large roller assures flat sheets |
| Separating roller pneumatically timed provides accurate separation and reliable performance |
Rotating Perforating wheel at Laminator consistently perforates the sheets for easy separation
without timing issues |
| Variable speed pull rollers for controlled sheet delivery |
| Controlled speed and snapping parameters provide optimum film separation |
| Synchronized sheet separator maintains continuous production |
|
| |
| Stacker |
| Adjustable stacking table accumulates output |
| Pneumatic controlled high speed piston vibrators |
| Automatic pile height adjuster |
|
| |
| Temperature control unit |
A closed heating system for heating of the laminating drum (max. 140° C) with 12 kW heating
capacity and cooling function |
|
| |
| Technical Specifications |
| Max Sheet Format: 780mm (L) x 1040mm (W) (30” x 40”) |
| Min Sheet Format : 300mm (L) x 400mm (W) (12” x 16”) |
| Paper Stock Range: 150 gsm to 450 gsm |
| Feeder Pile Height :1050 mm (41”) |
| Stacker Height : 875 mm (34”) |
| Machine Speed : 50 meters/minute* |
|
| * Depending upon material and operating conditions |
| Top |
| |
| MODEL VECTOR |
  |
|
| |
| Max Sheet Size: 780mm(L) x 1040mm(W) (40” x 30”) |
| Application of Sheet to Sheet Thermal Film Lamination |
| Integrated Feeder |
| Highly polished Chrome Laminating roller |
| Pneumatic Laminating nip pressure |
| Quick Change airshaft for Film unwinding |
| Circulated Oil Heated Temperature Control unit |
| Adjustable anti-curl bar |
| Pneumatically adjustable in-feed nip roller for Sheeting |
| Adjustable Stacker with pneumatic piston vibrators |
| Trolley |
|
| |
| Technical Specifications |
| Max Sheet Format: 780mm (L) x 1040mm (W) (30” x 40”) |
| Min Sheet Format : 300mm (L) x 400mm (W) (12” x 16”) |
| Paper Stock Range: 150 gsm to 450 gsm |
| Feeder Pile Height :990 mm (38”) |
| Stacker Height : 875 mm (34”) |
| Machine Speed : 40 meters/minute* |
|
| * Depending upon material and operating conditions |
| Top |
| |
| MODEL SPARK |
 |
|
| |
| Auto Feed Thermal Laminating machine with Circulated Oil Heating system, PLC, Air Shaft for film unwinding, Pneumatic Pressing and in-line Cutting system, and Jogger for collection. |
| |
| Features |
| Maximum Paper Size:- 780 x 1040mm 980x 1040mm |
| Minimum Paper Size:- 300 x300mm 300 x300mm |
| Weight of Paper :- 125 -500gsm 125 -500gsm |
| Maximum Laminating Speed : 40 M/ Min.* 40 M/ Min.* |
| Heating System : Circular Heated oil Roll |
| Unwinding Shaft : Pneumatic |
| Pressing /Inline cutting Control :- Pneumatic |
| Inline cutting control - PLC |
|
| Top |
| |
| |
 |
| |
DAYA PRINTOGRAPH Hand Feed Thermal Film Laminating Machine, Hot Lamination with Heated Pressure Roller Thermostatically controlled, Suitable For Sheet To Sheet Lamination, (Suitable only for BOPP films) Motorized Variac, Film Slitting Attachment, Anti Curl Bar, Infra Red Sensor, No Sheet Detector and Counter., Complete With DC Variable Drives, Electricals Control Panel, Accessories And Tools. |
| |
 |
| Operating Systems:- |
01 |
Nipping Pressure Roller |
Mechanical System |
| |
|
Hydraulic Pressure System
o Power Pack
o Manual Leaver |
| |
|
Pneumatic Pressure System |
02.
|
Heating System |
Thermostat Controlled Electric Heating System |
| Oil Heating System |
03. |
Automatic In Line Sheet Separation System (Suitable only for BOPP films) |
Mechanical System |
| Pneumatic System |
|
|
| |
| TECHNICAL SPECIFICATIONS: |
| Maximum Sheet Width |
600mm (24”), 800mm (32”) |
| Minimum Sheet Width |
150mm (6”) |
| Paper Stock Range |
115-500gsm |
| Silicon Nipping Roller dia |
160 |
| Heated Pressure Roller dia |
270mm |
| Heater |
3.5 Kw |
| Maximum Mechanical
Speed |
0-30 meters/minute |
| Maximum Mechanical Speed |
20m/min* |
|
| |
| * Depends Upon the Properties of Materials Being Used and Existing Operating Conditions |
| |
| OPTIONAL UPGRADED FEATURES |
| Automatic Feeder |
In-Line Embossing system |
| Air Shaft for Film Reel |
Air Shaft for Rewinder & Unwinder |
| Sheet to Reel Lamination |
Anti Curl Bar device |
| Reel To Reel Lamination |
Photo Cell Safety Device |
| Two Side Lamination |
Stagging with Jogger |
|
| Top |
| MODEL THC-COS-P |
 |
| Features |
| Nipping Pressure Roller control by Pneumatic System |
| Inline Cutting System Controlled by Pneumatic System |
|
|
| Top |
| |
| MODEL PENTA |
 |
| Features |
| Nipping Pressure Roller control by Pneumatic System |
| Inline Cutting System Controlled by Pneumatic System |
| Photocell Safety device |
| 01 (ONE) Pneumatic shaft |
| Heating System with IR tubes |
| Jogger |
|
|
| Top |
| |
| MODEL THC-COS-HM |
 |
| Features |
Nipping Pressure Roller control by Hydraulic Pressure system-
Manual Lever |
| Inline Cutting System Controlled Mechanically |
| Jogger |
|
|
| Top |
| |
| MODEL THC-IPEX |
 |
| Features |
| Nipping Pressure Roller control by Pneumatic System |
| Inline Cutting System Controlled by Pneumatic System |
| Photocell Safety device |
| Reel to Reel attachment |
| 3 Pneumatic shafts |
|
|
| |
| Above Machine With Following Optional Attachment |
| Photo Cell Safety Device |
| Oil Heating System |
| Rewinder |
| Pneumatic Shaft film unwinding |
| 2nd Heating System |
|
| |
| Sizes available: 600mm (24") and 800mm(32") any other size as per customer requirements |
| Top |
| |
