sheth@dayaprintograph.com +91-120-4546 306
Download Brochure Check Shensho Website

Fully Automatic Thermal Film Lamination Machine Model -SPRINT

Superior Versatility & Productivity

  • Application of Sheet to Sheet Thermal Film Lamination
  • Integrated Feeder
  • High polished Chrome Laminating roller
  • Pneumatic Laminating nip pressure up to 6 metric tonnes
  • Quick Change air shaft for Film unwinding
  • Water Heater Temperature Control unite
  • Adjustable anti-curl bar
  • Pneumatically adjustable in-feed nip roller for Sheeting
  • Adjustable Stacker with pneumatic piston vibrators
  • Servo driven controls with PLC and HMI

Technical Specifications

Max Sheet Format : 780mm (L) x 1040mm (W) (30” x 40”)
Min Sheet Format : 300mm (L) x 400mm (W) (12” x 16”)
Paper Stock Range : 150gsm to 450 gsm 150gsm to 450 gsm
Feeder Pile Height : 1050mm (41”)
Stacker Height : 875mm (34”)
Machine Speed : 50 meters/minute*
Max Oprating Temprature : 140˚C

Optional:

  • Two Side Thermal Lamination
  • In-line Embossing Unit

Fully Automatic Thermal Film Lamination Machine Model -SPARK

Features

  • Integrated Sheet Feeder
  • Circular Oil Heated Laminating Roller
  • Pneumatic controls for Film Unwinding
  • Motorized Jogger for Sheet Collection

Specifications

Max Sheet Size: 1040mm (L) x 780mm (W) x (40” x 30”)
Min Sheet Format: 400mm (L) x 300mm (W) (16” x 12”)
Paper Stock Range: 150gsm to 450 gsm
Feeder Pile Height : 685mm (26”)
Machine Speed : 30 Meters/minute*

Optional:

  • Electro Magnetic Heating
  • Depending upon material and operating conditions

Fully Automatic Thermal Film Lamination Machine Model -BETA

Specially Design for Digital Prints

  • Single Side Sheet to Sheet Thermal Lamination
  • Integrated feeder for stock range 120-450 gsm
  • Pneumatically controlled Heated Nipping Pressure Roller
  • Quick Change Air Shaft with pneumatic brake
  • Film Trimming and Perforating device
  • Pneumatic Sheet separation with Motorised Jogger

Technical Specifications

Max Sheet Size : 375 L x 520mm W (15” x 20”)
Min Sheet Size : 100 L x 148mm W (4” x 5”)
Mechanical Speed : 0-30m/min*
Power load : 4 HP
Heaters : 6KW

Hand Feed Auto Cut Thermal Film Lamination Machine Model -PENTA

Features

  • Nipping Pressure Roller control by Pneumatic System
  • Inline Cutting System Controlled by Pneumatic System
  • Photocell Safety device
  • 01 (ONE) Pneumatic shaft
  • Heating System with IR tubes
  • Jogger

Above Machine With Following Optional Attachment

  • Photo Cell Safety Device
  • Oil Heating System
  • Rewinder
  • Pneumatic Shaft film unwinding
  • 2nd Heating System
Sizes available: 600mm (24″) and 800mm(32″) any other size as per customer requirements

Fully Automatic Double Side Thermal Film Lamination Machine Model -NEXA

Features

  • Auto Feeder with Overlap Controls
  • Double Side Thermal Laminator
  • Mirror Glass Finished Steel Heated Roller
  • Silicon Nipping Pressure Roller
  • Circulated Oil Temperature Control Unit
  • Pneumatic Pressure
  • Two Film Unwinding Air Shafts
  • Film Slitter
  • Inline PET Film Auto Cutting System
  • Powder Removel with Brush and Vacuum
  • Static Eliminator

Optional

  • In-Line Double Silde Texturing
Sizes: 760mm (30″) Width x 1000mm (40″) Length
Feeder
Conveyor
Display Panel
Oil Heating Unit
Main Control Panel

Hand Feed Auto Cut Thermal Film Lamination Machine Model -OCTA

Features

  • Hand Feed Sheet to Sheet Thermal Lamination
  • Heated Pressure Roller
  • Hydraulic Nipping Pressure Roller
  • Rubber Pressure Roller 160mm
  • PID Type Temperature Controller with Infra Red Sensor
  • Mechanically Controlled In-line Cutting Unit with Silicon Rubber Rollers
    1. Perforation Unit
    2. Deculing Bar
    3. Digital Counter
    4. Collecting Table

Quick link

Our Policies

Contact Us

© Copyright 2022 Daya Printograph. All Right Reserved